User's Manual

(2) Selection of control module for fault code searching
“Fault Code Searching” function finds DTC automatically for selected control module through
the communication between a VCI and a vehicle. If DTC is found, “By DTC” function on the “Hot
Fix” menu can be effective.
① Control module selection
Click “Fault Code Searching Turn Off” button in order to change to “Turn On” State, for a use
of “Fault Code Searching” function. It is possible to select one or more control module in the
“Selected” section in “Turn On” state. Control Modules that will be applied in “Fault Code
Searching” will move to the “Selected” section by mouse click.
[Figure 7. Control module selection for fault code searching]
② Control module change
In order to modify control modules for “Fault Code Searching” after a move to the “Selected”
section, double click the control module icon in the “Selected” section. The icon will disappear
for the “Selected” section and will move back to the unselected section. It is also possible to add
another module to the “Selected” section. However, at least one control module should be in the
“Selected” section.
User’s Manual
Module : A-04-006 (p.05)