User's Manual

4. Communication Retry
If the communication is lost between the PC and the VCI or the VCI and the Vehicle, it is possible
to retry connection by going back to the initial page and clicking the “Retry” button. “Retry” button
is located in the upper right section of the screen, and retries to make connection for the selected
system control module when it is pressed.
Following matters should be checked before the communication.
1) Ignition switch of a vehicle should be turned on.
2) DLC cable of VCI should be correctly connected to the DLC connector of the vehicle.
3) VCI module power should be turned on.
4) Connection between the PC and VCI should be stable.
[Figure 14. Communication retry for selected control module]
User’s Manual
Module : A-04-006 (p.11)