User's Manual

1. VCI Power On

To turn on the VCI equipment, first of all, connect DLC cable from vehicle to VCI module and

depressing the main switch. If diagnosis connector doesn’t applied for 16 pin connector, in other

words, if battery power can’t be supplied from this diagnosis connector to VCI equipment, in this

case, cigar power cable must be connected with cigar connector to supply the battery power with

ACC stage from the ignition switch. In case of using electric supply from cigar power cable, please

connect directly to battery by using battery extension cable.

[Figure 1. Main switch of VCI main module]

1) Confirm the VCI operating condition

VCI equipment has window for checking the VCI operating condition. This window shows that the

condition of each function of VCI by showing with LEDs.

Power on/off and

method of switch operation

H/W understanding for Hi-Diagnosis Module : A–01-005 (p.01)

User’s Manual