User's Manual
4
TROUBLESHOOTING
The Model M does not turn on when I touch the
button.
Touch
with one nger only. Don’t touch the rest of
the touch panel with other ngers. The touch panel
works properly when used with one nger only.
What do the Bluetooth settings look like on the
iPhone
®
?
Playing
Settings on iPhone
®
Why is my mobile phone not connecting?
Please check the Support pages at genevalab.com.
How do I reset Bluetooth?
Up to eight paired Bluetooth devices can be stored.
To clear the memory, perform the following steps:
1. Select Bluetooth on Model M.
2. Within 5 seconds of entering Bluetooth mode, hold
down the
button until “RESET” displays.
3. Pair your mobile phone again.
What is the PIN for a Bluetooth connection?
The PIN is: 0000 ( 4 zeros ). Not all computers
or mobile phones require a pin code during initial
setup ( Pairing ).
I have an unreliable connection with dropouts
when listening via Bluetooth.
• Move the mobile phone closer to the Model M.
• Move away or turn off other wireless devices that
can disturb a Bluetooth connection ( for example
WLAN / Wi, other mobile phones etc. ).
How can I change the remote control battery?
1. Push the small lever in the direction of the arrow
with your nger or a small screwdriver.
2. While holding the small lever, slide out the battery
compartment
3. Replace the battery (3V lithium cell, 3V CR2025).
Verify that the battery is inserted with the right
polarity (+ side is facing down).
1
2
3
How can I erase or overwrite a preset?
Stored presets do not need to be erased — just use
the steps to store a new station in a preset.
Which DAB standards are supported?
DAB, DAB+, DMR and DMB.
• Band 3: 5A ...12D ( 174.928 MHz ... 229.072 MHz ).
• Kanal 13: 13A ...13F ( 230.784 MHz ... 239.200
MHz ).
How can I verify that the remote control works?
Every time a key is pressed on the remote control, a
small red light on the display lights up quickly.
How is it possible to hear the stereo from only one
speaker?
EmbracingSound
®
is the stereo sound technology
that makes you hear more dimensions of your media
library than ever before. The core of the Embracing-
Sound
®
technology is to integrate all speakers in a
tailored single box and by using a unique High
Denition Up - Mix engine, all dimensions in your
content is enabled.
Find out more at www.embracingsound.com.
How do I clean the device?
Use a soft, dry cloth to avoid scratching the surface.
Do not use cleaning alcohol, or other solvents to
clean the Cabinet surface as this can both damage
the lacquer and cause electrical failures. Before clean-
ing, unplug the device from the AC power outlet.
SUPPORT
More information and additional troubleshooting
Check the “Support” pages at genevalab.com.
Service and repair
If the product is damaged and needs repair, please
contact your dealer. Visit genevalab.com to nd a
dealer in your area.
Warranty
See the specic terms for your country at
genevalab.com.