Users Manual

Operating Manual Smart Weather Sensor
152 G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany
19.8.5 Message Format for Measurement 0R0
The 0R0 sentence format is a proprietary format similar to NMEA 0183 rules. The 0R0
sentence contains essential measurement values of the compact weather station and is
designed for compatibility with existing installations.
The sentence is requested by the PB command for single measurement and PC for cyclic
transmission.
If certain measurement values are not available for the subtype of the individual weather
station the related value will be replaced by 999999. The same applies for measurement
values with status not “OK”.
The message is field oriented, with variable length. The fields are separated by ','.
Message Format:
0R0,Dm=aaaD,Sm=bb.bM,Ta=cc.cC,Ua=dd.dP,Pa=e.eeeeB,Rc=f.ffM, Pt=ggN<CR><LF>
0R0 message header
, separator
Dm identifier wind direction
= separator
aaa wind direction in °
D unit °
, separator
Sm identifier wind speed
= separator
bb.b wind speed in m/s
M unit m/s
, separator
Ta identifier air temperature
= separator
cc.c air temperature in °C
C unit: °C
, separator
Ua identifier relative humidity
= separator
dd.d relative humidity in %
P unit %
, separator
Pa identifier air pressure
= separator
e.eeee air pressure in Bar
B unit Bar
, separator
Rc identifier precipitation difference
= separator
ff.ff precipitation difference (related to last transmission) in mm
M unit mm
, separator