Users Manual

Operating Manual Smart Weather Sensor
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 43
Automatic
Transmission
If one of the standard sets is selected, it is transmitted at the
specified intervals
Transmission
Intervall
Time in seconds between automatic telegram transmission
Message Start
Character
ASCII character marking the start of a response telegram; factory
setting is 2 / 02h (STX)
Message End
Character
ASCII character marking the end of a response telegram; factory
setting is 4 / 04h (STX)
Line Break Mode
End of line character sequence for a telegram; factory setting is
CRLF (0Dh, 0Ah), alternatives are CR (0Dh) or LF (0Ah)
Decimal Separator
Character
Decimal separator character; factory setting is a decimal point 46 /
2Eh (‘.‘)
Parameter Separator
Character
Separator character for parameters in the telegram; factory setting
is a semicolon 59 / 3Bh (‘;‘)
Block Separator
Character
Separator character for the individual blocks of a telegram;
factory setting is a colon 58 / 3Ah (‘:‘)