User's Guide

User’s Guide 5338
E-9
Specifications
Accuracy at normal temperature: ± 30 seconds a month
Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the
week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes);
Standard Time/Daylight Saving Time (summer time)
Analog Timekeeping: Hour, minutes (hand moves every 20seconds)
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Alarms: 5 daily alarms (with 1 snooze alarm); Hourly time signal
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59'59.99"
Measuring modes: Elapsed time, split time, two finishes
E-8
Adjusting the Analog Hand Setting
Use the operations below to adjust the analog hands so their settings match the
digital time.
x D (three seconds in Timekeeping Mode): Enters analog
hand setting mode.
D: Advances minute hand 20 seconds.
B: (while holding down D): Locks high-speed hand
movement.
A: Exits analog hand setting mode.
E-7
C
CC
Alarm Mode Stopwatch Mode
Countdown Timer Mode
Start/Stop
Split/Reset
E-6
Mode Selection and Operations
x Press C to change the mode.
CC
Timekeeping Mode World Time Mode
Scrolls between
cities.
Turns on illumination.
E-5
3. Use B and D to change the selected setting.
Screen This setting item: Operation
Reset the seconds to 00
Press D.
Toggle between Daylight Saving Time (ON)
and Standard Time (OFF)
Press D.
Change the city code
Use D (East) and B (West).
Change the hour or minute
Use D (+) and B (–).
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping
Press D.
Change the year, month, or day
Use D (+) and B (–).
4. Press A to exit the setting screen.
E-4
2. Press C to move the flashing in the sequence shown below to select a setting.
Seconds DST Home City Code Hour
C C C
Day Minute
C C
C C
Month Year 12/24-Hour Format
C C
Summer Time and Home City
Time and Date
E-3
Configuring Home City, Time and Date Settings
x Configure Home City and summer time settings first. After that, configure time and
date settings.
1. In the Timekeeping Mode, hold down A for about two seconds until the seconds
start to flash. This is the setting mode.
E-2
For a full Operation Guide and Q&A
information about this product, go to the
website below.
http://world.casio.com/manual/wat/
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
Important!
x This manual provides a brief overview of your watch.
MA1804-EA
© 2018 CASIO COMPUTER CO., LTD.