User's Guide

User’s Guide 5441
E-9
Specifications
Accuracy at normal temperature: ±15 seconds a month
Digital Timekeeping:
Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Two display formats (month, day or time); Home City code (can be
assigned one of 48 city codes); standard time / daylight saving time (summer
time)
Analog Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds,
World Time timekeeping (Hands move every 20 seconds.)
Digital Compass: Continuous readings for one minute; 16 directions; Angle value 0°
to 359°; Hand indication of north; Calibration (bidirectional); Magnetic
declination correction
E-8
Misaligned Hands
The analog hands may become misaligned as described below if the watch is exposed
to strong magnetism, impact, or other abnormal conditions.
• Analog time and digital time are different from each other
If this happens, refer to “Hand Home Position Adjustment” in the Operation Guide
available at the CASIO website and adjust the hand alignment.
E-7
Alarm Mode
World Time Mode
Timekeeping Mode
Thermometer Mode
Turns on
illumination.
Scrolls between
cities.
Mode dial hand
World Time
Minute Hand
World Time
Hour Hand
D
DD
E
DD
E-6
Mode Selection and Operations
• To return to the Timekeeping Mode from any other mode, hold down
D
for about
two seconds.
Digital Compass Mode
C
D
Stopwatch Mode
Countdown Timer Mode
Split/Reset
Start/Stop
D
E-5
3. Use
E
and
B
to change the selected setting.
Screen To do this: Do this:
Change the city code Use
E
(East) and
B
(West).
Toggle between daylight saving
time (
ON
) and standard time (
OFF
).
Press
E
.
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping.
Press
E
.
Reset the seconds to
00
(If the current seconds count is
between 30 and 59, one is added
to the minute count).
Press
E
.
Change the hour or minutes
Use
E
(+) and
B
(–).
Change the year, month, or day
4. Press
A
to exit the setting mode.
E-4
Configuring Home City, Time and Date Settings
• Configure Home City and summer time settings first. After that, configure time and
date settings.
1. In the Timekeeping Mode, hold down
A
until ADJ appears in the upper display.
• When you release
A
(after ADJ appears), city code will be flashing in the upper
display.
2. Press
D
to move the flashing in the sequence shown below to select a setting.
Hour Minutes
Year
12/24-Hour
Format
Seconds
Time and DateHome City and Summer Time
City Code DST
MonthDay
Illumination
Duration
Button Operation
Tone On/Off
E-3
For a full Operation Guide and Q&A
information about this product, go to the
website below.
http://world.casio.com/manual/wat/
E-2
Warning!
• The measurement functions built into this watch are not intended for taking
measurements that require professional or industrial precision. Values
produced by this watch should be considered as reasonable representations
only.
•
When engaging in mountain climbing or other activities in which losing your way
can create a dangerous or life-threatening situation, always use a second
compass to confirm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of
this product or its malfunction.
Important!
• This manual provides a brief overview of your watch.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
MO1805-EA © 2017 CASIO COMPUTER CO., LTD.