Operation Guide

I can’t reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is G-SHOCK Connected running?
The watch cannot re-connect with the
phone unless G-SHOCK Connected is
running on the phone. On the phone’s
Home Screen, tap the “G-SHOCK
Connected” icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the “G-SHOCK Connected” icon.
Then on the watch, hold down (B) for at
least two seconds until the second hand
points to [R] twice.
Is a timer countdown operation in
progress?
Connection with a phone is not possible
while there is 30 seconds or less
remaining on a countdown timer
operation. Stop the countdown operation
before connecting with the phone.
Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone is in the Airplane Mode. After
exiting the phone’s Airplane Mode, go to the
Home Screen and tap the “G-SHOCK
Connected” icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Q3
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, turn Bluetooth off and then back
on, and then tap the “G-SHOCK Connected”
icon on the Home Screen. Then on the watch,
hold down (B) for at least two seconds until the
second hand points to [R] twice.
Q4
I can’t connect after turning off the
phone.
Turn on the phone and then tap the “G-
SHOCK Connected” icon. Then on the watch,
hold down (B) for at least two seconds until the
second hand points to [R] twice.
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the “G-SHOCK Connected” icon.
Then on the watch, hold down (B) for at
least two seconds until the second hand
points to [R] twice.
Has the watch been re-paired with the
phone?
After deleting pairing information from G-
SHOCK Connected, re-pair them.
l
Unpairing
l
C
Pair the watch with a phone.
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
A Hold down (E) for at least two
seconds to enter the Timekeeping
Mode.
B Hold down (D) for at least two
seconds. Release the button when
the name of the currently selected
Home City appears on the display.
C Press (D) to cause the seconds digits
to flash.
D Hold down (C) for at least two
seconds. Release it when [PAIR
CLR] stops flashing. This deletes the
pairing information from the watch.
E Press (D) to return to the
Timekeeping Mode.
Operation Guide 5594
37