User's Manual

1615
Setting switching
Driver could reserve two modes, different button functions
and dpi content could be set under different modes
The name of mode could be revised as per your favorite by
double clicking, as below:
If you want to back to reset mode, click “reset” button, then
click “apply” or “confirm”.
How to switch:
1. Single click mouse icon by right button, the name of
modes arise
2. Under driver window, click the accordant name, then
click “apply” or “confirm”
Settings steps:
Driver settings steps:
1. Set the contents by your demand
2. Click “apply” or “confirm”
3. Leave your hand from mouse for 3-5 seconds
4. Once the light of the mouse is off, the settings are valid
Remark:
1. The mouse has function of reserving profiles. You can still use the
activated set profiles when quit driver or change computer
2. After settings, you must leave your hand from the mouse for 3-5
seconds, otherwise, the settings data could not be sent to mouse, and
the setting would fail.