User's Manual

10 - E nglish Using the mouse
Mouse button Assignment without
software
Default assignment with
installed software
Optional with
installed software
5 (mouse wheel
towards righ t)
No function (under
Windows 7 /
Windows 8: s creen
content is shifted to the
right)
Screen content is shifted
to the right
Freely programmable
6 (side button) No function
Function ALT+TAB
(switch between the
two last active windows)
Freely programmable
Setting the scanning sensitivity
The m ouse supports resolutions (scanning sensitivity) of 800, 1200 and 1600 dpi.
The default setting is 1200 dpi.
DPI+
DPI-
LED
► To increase the scanning sensitivity,
press the plus key.

The mouse responds faster.
► To decrease the sca nning sensitivity,
press the minus key.

The mouse responds slower.
When setting the scanning sensitivity,
the LED flashes 3 times:
• red for 800 dpi
• green for 1200 dpi
• orange for 1600 dpi
Switching the mouse on and off
If you are not intending to use the mouse for a long time, you can s witch it off to save power.
Set the sw itch on the bottom of the mo use to "Off".
If you wish to resume work with the mouse, do not forget to switch it on again.
30 Fujitsu