User's Manual

10
D.1.2 To turn your BTH-1XX off
1. Press and hold the “Talk” button firmly for at least 3 seconds until the LED indicator light emits a very short burst of
flashes. In the meantime, two short beep tones would be heard if headset is placed near ear.
2. Without delay, release the button.
The headset is now turned off and no indication light activity in this mode. You will need to wait for 5 seconds
before turning it on again. As long as you are recharging your headset regularly, you do not need to turn your
headset off after using it – you only need to ‘end the call’ (see Ending a call)
D.2 Pairing the headset
‘Pairing’ creates a wireless link between two Bluetooth devices such as headset and mobile phone.
1. Prepare your other to-be-paired device (e.g. your mobile phone) enter searching Bluetooth device mode according
to its user documentation on pairing.
2. Ensure that the headset is off and no AC power adapter plugged in..
3. Put the Line switch to the assigned line.
4. Press and hold the “Talk” button about 3 seconds. When the LED indicator flashes red and blue each time after