User's Manual

another, it means that you are in pairing mode. Then you can release the button. If you wear the headset, you will

hear 3 short beep tones when enter pairing mode

5. After searching for a while, your other under pairing mode device (e.g. mobile phone) should list model name of

this headset, e.g. BTH-1XX, Please confirm it following your device user documentation. Then, when pin code or

passkey of headset is asked, please enter 0000, which is default pin code pre-stored in the headset. Then, pairing

procedure starts and taking a few seconds, it will show pairing successful. In the meantime, you might now replace

the given headset model name with your favorite name tag. The pairing process is then completed. A beep tone

will be heard on BTH-1XX when pairs successfully

6. The LED indicator will resume to the standby mode (flashing blue every 3 seconds) after a short while.

Now that the devices are paired, you will not need to repeat the pairing process in future use as long as you are

using the same headset.

7. To pair BTH-1XX with more than one device, please repeat above 1 to 6 steps by selecting Line switch to different

line number.

Remark : 1. For BTH-1XX, if you slide Line switch during pairing mode, headset will go to deep sleep mode and LED

indicator will be turned off. If there is incoming call to previous paired phone of other line, you have to press