User's Manual

13
6. For BTH-1XX, as long as your mobile phone Bluetooth is on and has been stored ID in one of
the line of the headset, the phone link of dialing mobile phone and headset will be established no matter
which Line switch are selected in the BTH-1XX
* If your call is not answered, you must end the call as described in Ending a call *.
E.1.2 Calling from the headset with voice commands
If your mobile phone supports voice dialing, you can use this feature with the headset.
1. Ensure that your headset is in standby mode and slide the Line switch to the right line while use BTH-1XX.
2. Ensure that the voice dialing on your mobile phone is enabled.
3. Briefly press on the talk button to “activate” the headset. Now the LED indicator is lit still and you can also hear a
faint background noise as well. It might take a while to establish link. Then, a tone might be heard in the headset.
After beep tone, speak out the voice tag as you normally would.
4. The phone will automatically dial your voice tag.
5. When connected you are free to talk normally.
* If your call is not answered, you must end the call as described in Ending a call.
Remark: We recommend that you record all the voice tags through the headset to “train” your phone for the voice