User Manual

RF EXPOSURE WARNING
In order to satisfy the FCC RF exposure requirements, the BDA/antenna
installation must comply with the following:
The outdoor antenna (Yagi type or similar directional antenna) must be installed
so as to provide a minimum separation distance of 0.3 meters (30 cm) between
the antenna and persons within the area. (This assumes a typical antenna with
gain of [10.1 dBi, VSWR ≤ 1.5:1, Zo= 50 ohms, and a cable attenuation of
between 1-10 dB).
The indoor antenna (omni directional) must be installed so as to provide a
minimum separation distance of 0.2 meters (20 cm) between the antenna and
persons within the area. (This assumes a typical wide-beam type antenna with
gain of 0-2 dBi, VSWR ≤ 2:1, Zo= 50 ohms, and a cable attenuation of between
1-10 dB).
Page 9