User's Manual

UserManual.doc 20
Range Setting
Three range settings are available for adjustment on the unit. Please use the following instructions if the
equipment range setting must be changed.
1. Select RNG from the Setup Menu. The current
range setting displays with options to perform
range test and change the range setting.
2. Select SET to adjust the range setting. The
default setting is High.
3. Select from LOW, MED or HIGH to adjust the
range setting. The ‘Current Range’ will change
with the selection that is made as a
confirmation.
NOTE: We highly recommend performing a
range test before and after any range setting adjustments are made to ensure the participant will
be monitored properly.
INFO Menu
This menu presents various options that reflect equipment settings and information. Select PREV or
NEXT to scroll through the GSM Menu (Cellular PHMUs Only), Enrolled PTX, PHMU Calls, Stored
Events, PHMU Battery and PHMU Firmware.
GSM Menu (Cellular PHMUs Only)
1. Select VIEW to access Cellular Signal Strength
and SIM Card Information.
a. Select SGNL from the GSM Menu to
verify the Cellular Signal Strength. The
LCD Screen will display a scale that
ranges from (–) to (+). The bars that
fluctuate on the scale offer a real time
visual of the cellular signal strength.
b. Select SIM from the GSM Menu to review
the IMSI number.
Enrolled PTXs
1. Select VIEW to view the Enrolled PTX Serial Number.