User's Manual

PID2_UserManual.doc 23
Power Down: PHMU
1. Select OFF from the Setup Menu to access the Power Down Menu.
2. Select PHMU from the Power Down Menu.
a. If the PHMU has any Stored Events,
select SEND to report all events or select
SKIP to bypass and transmit at a later
time.
3. Disconnect the power when the instruction
displays.
NOTE: Do not turn or remove the PHMU Menu Key until the LCD turns off.
Although the PID is no longer enrolled to the PHMU, it is not powered down.
Power Down: PID
1. Select OFF from the Setup Menu to access the Power Down Menu.
2. Select PID (or PTX) from the Power Down Menu.
3. Select ACEPT to remove the PID.
4. Select YES to Power Down the selected PID or
select NO to bypass this step.
a. If YES, make sure the selected PID is
within range and cut the PID Band when
the instruction displays. The PID will emit
a series of short descending LED blinks
to indicate that it has been powered
down.
b. If the PID is not present or the band is
not cut after one minute, the LCD Screen
will time out and offer the option to RETRY or SKIP to the next step.
5. The LCD Screen will display when the PID has
been removed from the PHMU. Select OK to
return to the Power Down Menu.