User's Guide

 13
To Check the Key Fob’s Battery:
1. Put the Key Fob into the tool.
!
Make sure that the metal key ring points towards
one end of the tool (see picture on the right).
2. Press the PID GET STATUS button.
3. Check the PID OK and PID SLEEP/FAULT lights on the side of the
tool. (See table below):
Light Colour Meaning
PID OK
Green Key Fob OK.
PID SLEEP/
FAULT
Flashing Amber Low battery.
Red
Dead battery/Comms fault.
(Check that the key fob is aligned correctly
in the tool).
i
Tip: You can use the "Get PID Status" option on EMMO to
get the key fob’s battery level. (See the EMMO User Guide).
Checking the Key Fob’s Battery
GET
STATUS
Key Fob
Key ring