User's Guide

PID
GET
STATUS
ON/
OFF
 19
Press the ON/OFF button to cycle
through the following modes in turn:
Sleep, Survey, Active.
PID Buttons
The two PID buttons are used to control the
PID or SOLO. You’ll nd them on the top of
the tool. (See General Layout on page 9).
Press the GET STATUS button to
get the status of the PID or SOLO.
(See
PID Status Lights on page 20).
!
You cannot switch a tag to Survey
Mode if it is in a tamper state.
If the tag’s battery is low, it will
always stay in Sleep Mode.