User's Guide

PID SLEEP
/ FAULT
PID
OK
 20
PID Status Lights
The PID OK light is steady green when the PID/SOLO is active,
and ashing green when the PID/SOLO is in survey mode, i.e.
during installation.
Colour Meaning
Green Active Mode
Flashing Green Survey Mode
The PID SLEEP/FAULT light shows you if the PID/SOLO is in
sleep mode, or if there is a tamper problem or hardware fault:
Colour Meaning
Flashing Red PID/SOLO in tamper state
Red Tool–to–PID/SOLO link error
Amber Sleep Mode
Flashing Amber Battery low
Flashing Red/Amber Hardware fault
There are two identical sets of PID Status lights; one on
each side of the tool. (See General Layout on page 9).