User's Guide

 21
MU Buttons
Press the GET STATUS
button to get the status of the
MU or TU. (See MU Status
Lights
on page 22).
GET
STATUS
FORCE
DIAL
MU
OFF
OK
MU
FAULT
EMMO RAM
The three MU buttons are used to control the MU
or TU. You’ll nd them on the top of the tool.
(See General Layout on page 9).
Press the FORCE DIAL
button to dial-up and send
the MU or TU’s event log
to the central database.
Press the MU OFF button
to shut down the MU or TU.
!
Note: Un-plug the mains power
from the MU or TU docking
station before shutting down.