User's Guide

 23
RAM Status Lights
The EMMO light is green when the tool is in EMMO Mode.
(It blinks green when the tool is communicating with the PDA).
Colour Meaning
Green Tool in EMMO mode
Flashing Green Tool communicating with PDA
The RAM light blinks every time that it receives a radio signal
from an active tag during a RAM survey.
The colour of the blink shows the status of each detected tag:
Colour Meaning
Green Blink Active tag found, no tamper
Red Blink Tampered tag found
Amber Blink Tag with low battery found
The RAM Status Lights are used when you are Performing a
RAM Survey
(see page 47), or are linking to a PDA running the
EMMO software. (See the EMMO User Guide).
To view the EMMO status lights, hold the tool so that the
charger socket points towards you.
(The same lights are used when you communicate with the MU
or TU, but are labelled the other-way-round.
(See
MU Status Lights on page 22).
OK
MU
FAULT
EMMO RAM