User's Guide
Table Of Contents
34
5. Open the strap-tting-lever
until you hear a click. (Figure 3)
The strap is now tted in one side of the SOLO.
6. Check that the PID SLEEP
/FAULT light is ashing red.
7. Close the strap-tting-lever and remove
the SOLO and strap from the tool. (Figure 4)
8. Check that the light on the
SOLO is ashing amber.
9. Pull on the free end of the strap to make
sure that it is securely tted into the SOLO.
Fitting a SOLO to a Subject (continued)
PID SLEEP
/ FAULT
PID
OK
Figure 3
Open the strap-
tting-lever
Figure 4
Remove SOLO and strap from tool
Flashing Amber Light
Continued on next page.