User's Guide

 36
14. Check that the PID OK
light is ashing green.
15. Close the strap-tting-lever and remove
the tool from the SOLO. (Figure 7)
16. Pull on the strap to make sure that both
ends are securely tted into the SOLO.
The SOLO ashes amber while it
contacts the monitoring server.
When the installation details are uploaded,
the SOLO vibrates for 5 seconds and a
constant green light shines for 10 seconds.
17. If the SOLO is being installed on its own, when the green
light on the SOLO goes out, the installation is complete.
18. If you are installing the SOLO with an MU, you must
perform an MU range survey. (See
MU Range Survey and
Data Upload
on page 37).
PID SLEEP
/ FAULT
PID
OK
Figure 7—Remove the tool from the SOLO
Vibrates
(5 seconds)
Green Light
(10 seconds)
Fitting a SOLO to a Subject (continued)