User's Guide

Phone Line In Phone Extension
Multicom/Landline MU Connections
 37
MU Range Survey and Data Upload
When the MU has initialised and a new PID or SOLO has been
tted to the subject, the MU automatically goes into Survey Mode.
(See Initialising an MU on page 26, and either Fitting a PID to a
Subject
on page 30, or Fitting a SOLO to a Subject on page 33).
1. The MU starts beeping and displays the new tag’s serial number.
2. Walk the subject around all areas of the premises.
The MU beeps every time that it receives a
radio signal from the tag in survey mode.
!
The MU should beep every second.
A ‘missed’ beep shows a possible blind-spot.
3. When the survey is complete,
press the blue button on the MU.
The MU displays the MU and tag serial numbers,
and the survey ranges (R1 and R2)
4. Phone the monitoring centre on your mobile
and tell them the range values (R1 and R2).
5. Multicom/Landline MU ONLY
Connect the MU to the phone line wall socket
and connect the extension phone to the MU.
SURVEY P205764
Press BLUE button when walk
around complete
MU20634 P205764 R1=180 R2=190
Press BLUE button when call
complete
Continued on next page.