User's Guide

 39
TU Range Survey and Data Upload
When the TU has initialised and a new PID has been tted to the
subject, the TU automatically goes into Survey Mode. (See Initialising
a TU
on page 27, and Fitting a PID to a Subject on page 30).
1. The TU displays WALK AROUND WITH PID
and the PID’s serial number.
2. Leaving the TU docked, walk the subject
around all areas of the premises.
The TU beeps every time that it receives a
transmission from the PID in survey mode.
!
The TU should beep once every second.
A ‘missed’ beep shows a possible blind-spot.
3. When the survey is complete,
press the left-hand button on the TU.
The TU beeps and displays the TU and DOCK serial numbers.
4. Press the right-hand button to view the
PID’s serial number and the survey ranges:
5. Phone the monitoring centre on your mobile
and tell them both range settings.
6. When you have completed your call to the monitoring centre,
press the right-hand button on the TU again.
Continued on
next page.
CALL CENTRE INFO
TU: 500076
DOCK: 540077
WALK AROUND
WITH PID
222771
CALL CENTRE INFO
PID: 222771
RANGE 1: 180
RANGE 2: 190