User's Guide

 46
Investigating Tamper Alerts
Follow the steps below when you need to investigate a tamper alert:
!
DO NOT remove the tag from the subject’s leg before
checking the tag and strap for signs of tampering.
1. Inspect the tag and strap for signs of tampering:
 Check that both ends of the strap are secured.
 Check if the strap clips are damaged. (Figure 1)
 Check that the strap has not been cut, torn or frayed.
 Check for cracks, dents and scratches on the outer casing.
 Check for clear or white glue residue.
2. Clip the tool over the tag. (Figure 2)
3. Press the PID GET STATUS button.
4. Check the PID SLEEP/FAULT and PID OK lights on the
side of the tool. (See
PID Status Lights on page 20).
5. Further checks can be carried out using EMMO.
(See the EMMO User Guide).
Figure 2
Clip the tool
over the tag
Figure 1
Check strap
clips for
damage
GET
STATUS
PID SLEEP
/ FAULT
PID
OK