User's Guide

 50
MU Error Messages
Continued on next page.
Error Cause Action
NO GSM SIGNAL!
Move unit to different
location
Poor GSM (mobile phone) signal.  Move the MU to a location with better GSM reception.
MU FAIL!
No GSM Signal
CALL FAILED!
MU FAIL!
Return to GML
MU Failure.
 Check that the MU is connected to the mains power.
 Check the MU’s status using EMMO, (see the EMMO User Guide)
which may indicate possible interference (MU status codes J1/J2).
Possible causes may include faulty car-remote key fobs.
 If the MU still fails, return it for servicing.
PID INSTALL FAILED
PID not in list
The number of the PID just installed on
the MU does not match the PID number
entered by the monitoring centre.
 Call the monitoring centre and check that they have entered
the correct PID and MU serial numbers.
PID INSTALL ABANDONED
The red button on the MU was pressed
during the install.
 Restart the installation from the beginning.