User's Guide

Dexcom G6 System User Guide
67
Chapter 5: Set Up Your Display Devices
Receiver: Setup
Enter sensor code.
If you don’t enter the sensor code, the G6 requires
you to calibrate on a daily basis.
The sensor code is on the applicator’s adhesive
label and is unique to that specific sensor. Enter
the code from the applicator you’ll use to insert your sensor. If you enter the sensor
code from another applicator, your G6 readings may be off.
Setting up both the receiver and app? No need to enter the sensor code again, the app
will join your current sensor session.
Receiver: Setup
Your transmitter serial number is on the bottom of
the transmitter and its box. Look for SN.




STEP
8
of 11
STEP
9
of 11
LBL014003 Rev XXX Artwork, G6 CGM System User Guide US.indd 67 2/5/19 9:26 AM