User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
11 | G6 Technical User Manual ©2022 Blackline Safety Corp
Rev 01 Uncontrolled when printed
2.1 G6 PUSH BUTTONS
Center button
Press and hold for 3 seconds to
power on G6.
Press to enter the Global Navigation
menu, and to confirm navigation
banner selections.
Navigation buttons
Press to navigate the current screen
and confirm navigation banner
selections.
2.2 POWERING ON G6
Powering on G6 initiates the device start-up sequence. The start-up sequence depends on the
device’s configuration and occurs any time the device is powered on.
NOTE: Always power on G6 in a known clean environment.
To power on G6:
1. Press and hold the center button for 3 seconds.
G6 will power on and Blackline Safety screen will
display.