User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
©2022 Blackline Safety Corp G6 Technical User Manual | 12
Uncontrolled when printed Rev 01
2. G6 connects to Blackline Live and initializes your device,
performing a hardware self test and installing firmware
updates, if required.
NOTE:
Ensure you allow adequate time for the device
to complete the required updates. This can take up to
20 minutes depending on the sensor type.
If G6 requires additional time to establish a network
connection, the device enters an extended initialization
sequence.
If G6 is unable to connect and update, the initialization
process will time out. The device will attempt to
connect at the next synchronization interval.