User's Manual

Table Of Contents

Rev 01 Uncontrolled when printed

3.1 ACKNOWLEDGING OPERATIONAL NOTIFICATIONS

Operational notifications are activated when G6 requires your attention. Operational

notifications will repeat until you acknowledge them, or they time out.

NOTE: To allow you to read and understand notifications, and to avoid accidentally muting the

notification, there is a 2-second delay on your ability to acknowledge full screen notifications.

To acknowledge and mute an operational notification:

1. Select by pressing the center button.

If G6 is within compliance (e.g., a bump test or calibration

is due, but not overdue) and free of any gas related

abnormalities, low battery warnings, or device errors,

G6’s Home screen will have an OK status (green).

If G6 is not in compliance (e.g., a bump test or calibration

is overdue), or if gas related abnormalities, low battery

warnings, or device errors are active, G6’s Home screen

will reflect the notification status.

2. To ensure G6 continues to operate correctly, take the

action indicated by the device to address the notification.