User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
©2022 Blackline Safety Corp G6 Technical User Manual | 24
Uncontrolled when printed Rev 01
Low gas
The low gas notification is activated when G6 detects a low gas event.
When you acknowledge the notification, G6’s Home screen and banner
will reflect the low gas status until the low gas event is resolved.
NOTE:
The device’s yellow LED light pattern will persist after you
acknowledge/mute the low gas notification until the low gas event is
resolved. If the muted low gas event conditions persist past 120
seconds, the low gas notification will retrigger with lights, sounds, and
vibration.
Following the low gas notification, the logged peak gas value of the low
gas event is displayed on the Gas options screen.
The screen will show the peak value recorded and the time it occurred
until a new peak is reached, the peak value is manually reset, or the
peak value automatically resets.
For more information on viewing and resetting gas readings, refer to
Viewing and Resetting Gas Readings.