User's Manual

Table Of Contents

Rev 01 Uncontrolled when printed

Short term exposure limit (STEL)

The sensor short term exposure limit (STEL) notification is activated when

G6 detects you have reached the STEL threshold configured by your

safety supervisor.

STEL refers to the gas concentration that you can be continuously

exposed to for a configurable time frame without suffering adverse

health effects. STEL represents the rolling average of a live gas reading

over the duration of a configured time interval.

If a STEL notification is activated, immediately evacuate the area, and

follow your emergency safety protocol. Once you are in a safe location,

read the information on G6’s screen.

To acknowledge and mute the notification, select

by pressing center

button.

This does not cancel your device’s connection to Blackline Live.

NOTE:

If connectivity is unavailable, event data is stored and uploaded to

Blackline Live during the next scheduled synchronization for your device.

When you acknowledge the high urgency notification, G6’s Home screen

and banner will reflect the STEL status until the gas conditions dissipate

and the STEL event is resolved.

The device’s red light pattern will persist after you acknowledge/mute the

notification until the STEL event is resolved.

Following the STEL gas notification, the notification remains active until

the STEL value drops below the configured time and concentration

setpoints, or the STEL value is manually reset.

NOTE:

You can reset the STEL while your device is experiencing a high

urgency STEL notification and the STEL notification will clear. However, if

gas is still present, the corresponding high or low gas notification will

remain active.

For more information on viewing and resetting gas readings, refer to

Viewing and Resetting Gas Readings.