User's Manual

Table Of Contents

Rev 01 Uncontrolled when printed

5. To reset the STEL value to zero, press the button.

NOTE:

To cancel the procedure and exit at any time, select

by pressing the left button.

6. Once the value is successfully reset, select by pressing

the right button to return to the Gas options screen.

6.2 BUMP TESTING G6

If configured for your device, bump testing

verifies that your device’s gas sensors and

notification indicators (lights, sound, and

vibration) are functioning correctly. During a

bump test, you apply a known concentration

and amount of gas to confirm the sensor will

trigger a notification due to the gas exposure.

Your bump test schedule should be informed

by your company’s safety policy and is

configurable by your Blackline Live

administrator.

G6 automatically communicates bump test data

to Blackline Live at the device’s next scheduled

synchronization and will remind you when a

bump test is overdue.

For more information on G6 bump testing notifications, refer to Operational Notifications.

To manually bump test G6, you will need a calibration cap and tube. Alternatively, you can

bump test using G6 Dock.