User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
39 | G6 Technical User Manual ©2022 Blackline Safety Corp
Rev 01 Uncontrolled when printed
7. Verify the gas and your device’s connection to the
calibration cap and turn on the gas.
G6 automatically detects the gas and starts the calibration.
8. Once the calibration is successfully completed, turn off the
gas and disconnect the cap from your G6.
9. Select by pressing the right button.
G6 stays in the calibration maintenance state while any
residual gas clears.
Once complete, the Compliance screen opens, displaying
information about when your device’s next bump test and
calibration are due.