User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
49 | G6 Technical User Manual ©2022 Blackline Safety Corp
Rev 01 Uncontrolled when printed
2. If a firmware update is available, start the firmware update
by selecting by pressing the right button ( ).
NOTE:
To cancel the firmware update and exit the
workflow, select
by pressing the left button.
G6 updates the firmware and then restarts.
Following the restart, your G6 lights, sounds, and
vibration indicators notify you that the device’s start-up
sequence is in progress.
G6 notifies you when the firmware installation is complete.