User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
51 | G6 Technical User Manual ©2022 Blackline Safety Corp
Rev 01 Uncontrolled when printed
8.10 POWER OFF MENU
Use the Power off menu to shutdown your G6 in case you need to troubleshoot, ship, or
repair the device.
To power off your device:
1. Using the navigation buttons, scroll through the Device
settings menu and select
Power off
by pressing the center
button (
).
The confirm power off screen opens.
2. To power off your device, select by pressing the right
button.
NOTE:
To cancel the shutdown, select by pressing the
left button.
9 MAINTENANCE
9.1 CHANGING THE G6 GAS SENSOR FILTER
G6’s filter must be replaced when it becomes visibly soiled, or if bump test and calibrations fail
repeatedly. You will need:
• Flathead screwdriver
• Replacement filter
IMPORTANT: Always perform maintenance procedures in a clean, dust free environment.