User's Manual
Table Of Contents
- 1 G6 Overview
- 2 Operation
- To power on G6:
- OK Status
- Low Urgency Status
- High Urgency Status
- 3 Operational Notifications
- 4 Low Urgency Notifications
- 5 High Urgency Notifications
- 6 Gas Detection
- 7 Features
- 8 Device Settings
- 9 Maintenance
- 10 Firmware Updates
- 11 Support
- 12 Specifications
- 13 Legal Notices and Certifications
53 | G6 Technical User Manual ©2022 Blackline Safety Corp
Rev 01 Uncontrolled when printed
5. Reattach the gas sensor faceplate to the G6, inserting the
faceplate brackets at an angle with the top of G6 and
pressing the bottom of the faceplate until it clicks into
place.
9.2 CLEANING G6
To clean G6, wipe down with a damp cloth. Do not use pressure spray or cleaning solvents.
When not in use, G6 should be stored in a dry and dust-free environment.
10 FIRMWARE UPDATES
To offer new features, Blackline Safety releases firmware updates at regularly scheduled
intervals. Firmware updates have two steps:
Download
Installation
Specific information about new updates can be found at support.blacklinesafety.com. If you
have any questions, please contact our Customer Care team.
10.1 DOWNLOAD
If a new version of firmware is available for download, G6 downloads it during the regular daily
scheduled synchronization. This operation takes place automatically and cannot be declined
by the device user. G6 will be ready to install the firmware update when the download is
complete.
10.2 INSTALLATION
Once the device has downloaded a new version of firmware, it must be installed on your G6.
Installation of a new version of firmware that has been downloaded onto the device can take
place either manually or automatically.