User's Manual
12 || G7 BRIDGE TECHNICAL USER MANUAL
POWER ON
How do I turn on my G7 Bridge?
Press the power button, and wait for the blinking green connectivity light to turn solid.
It takes approximately two minutes for G7 Bridge to connect to the Blackline Safety
Network.
NOTE: Sucient battery power and access to wireless networks are required to
connect to the Blackline Safety Network. G7 Bridge will automatically use cellular
communications if available, and a clear view of the sky is required for satellite
communications.
How do I connect my personal safety device?
Your G7 Bridge has been pre-programmed and set up to specically pair with your
personal safety monitoring devices. Turn your G7 Bridge on and make sure it has
connected to the Blackline Safety Network. Press and hold the power button on your
G7x or Loner 900 device. Wait for the blinking green connectivity light on your personal
safety monitoring device to turn solid. Once connected, the green light will stay on and
your safety is being monitored while within range of your G7 Bridge radio link.