User's Manual
G7 BRIDGE TECHNICAL USER MANUAL || 17
POWER OFF
How do I shut down?
When powered, G7 Bridge can remain on at all times. When G7 Bridge is powered off,
all connected devices will no longer be monitored.
To shut down G7 Bridge, rst press and hold the power button on all connected G7x
and Loner 900 devices. Each device will go into shutdown sequence, sending your log
off status to the Blackline Safety Network.
After all personal safety monitors have been shut down, if needed you can now power
o your G7 Bridge. Press and hold the power button on G7 Bridge until it goes into
shutdown sequence. Your personal safety monitoring devices are no longer being
monitored.
NOTE: When logging o, ensure G7 Bridge has an unobstructed line of sight to the sky
and the green connectivity light is solid. A challenging environment with an obstructed
view of the sky can make communication dicult. G7 Bridge may extend the shutdown
sequence up to 20 minutes until all priority messages are transmitted over the cellular
or satellite network.