User's Manual
26 || G7 BRIDGE TECHNICAL USER MANUAL
OPTIONAL HARDWIRING ACCESSORIES
G7 Bridge has a 44-hour battery life, and can be charged using a vehicle 12 or 24 VDC
power outlet, USB port, or cigarette socket in a vehicle. However, it may be benecial
to hardwire G7 Bridge to your vehicle power system. Prior to installation, consider the
following:
Location near 12 or 24 VDC power
Power circuit controlled by ignition key to avoid battery drainage when vehicle is
not in use
G7 Bridge consumes up to 1.0A of peak current, ensure circuit can handle additional load
EXTERNAL HARDWIRE KIT NOT INCLUDED
The external three-wire hardwire kit is used to hardwire into a vehicle’s 12/24 VDC
power system. Wiring can be done through center/rear brake light, or another external
power source. Ensure the cable is properly grounded.
NOTE: The hardwire cable is six ft in length. Depending on required length, additional
wire may need to be added to cable and appropriately spliced and insulated.