User's Manual
G7 EXOTECHNICAL USER MANUAL || 15
4.1 YELLOW WARNING ALARM
EXO’s yellow warning alarm can be triggered by functional settings or
reaching low alarm gas detection thresholds. Both are congurable on
Blackline Live to best t your needs. Contact your safety supervisor to
learn more about how EXO’s features are congured.
Rapid Blinking
4. SAFETY ALERTS AND ALARMS
What do I do in the case of a yellow warning alarm?
Always follow your company’s safety protocol.
Blackline recommends that people in the vicinity of an EXO
in yellow warning alarm should leave the area. A trained
device operator may approach EXO if their safety protocol
allows it or a trained device administrator can use the
information available in
the Blackline Live Portal to
assess the situation.
Alarm information can be
read on EXO’s screen. Press
and hold the up and down
buttons at the same time
to cancel the alarm and
to let EXO know you have
read the message. In the
case of continuous gas
exposure, EXO will unmute
itself after two minutes if
detected gas levels have
not returned to normal.
4.2 RED ALERT
EXO’s red alert can be triggered by pulling the SOS latch or by reaching
high alert gas detection thresholds. Both are congurable on Blackline
Live to best t your needs. Contact your safety supervisor to learn more
about how EXO’s features are congured.
Rapid Blinking
What do I do in the case of a red alert?
Immediately follow your company’s safety protocol and
evacuate the area.
If you know the area is safe and your company’s protocol
allows you to stay in the area, read the information on EXO’s
screen. Press and hold the up and down buttons at the same
time to let EXO know you
have read the message
and to mute the alarm. In
the case of continuous gas
exposure, EXO will unmute
itself after one minute if
detected gas levels have
not returned to normal.
NOTE: Red alerts
are immediately
communicated to
monitoring personnel. Gas
levels returning to normal
or manually muting
the sound does NOT
cancel the alert sent to
monitoring personnel.
Rapid Blinking