User Manual

10 Attaching the Monitor
Flush Installation
1. Carefully place your
monitor facedown on a
flat surface.
Tip: To avoid scratching the
screen, place your monitor
on a soft cloth such as a
towel.
2. Align the holes in the
VESA mount with the
corresponding mounting
holes in your monitor.
Important: Make sure the
raised edge of the VESA
mount is at the top of your
monitor.
3. Insert the four M4 × 12
screws (the shorter of
the Phillips screws) into
the VESA mount, and use
a Phillips screwdriver to
fasten them until fully
tightened.
ATTACHING THE MONITOR