User Manual

12
STEP 5:
Positioning Installed
Wall Mount
• Upon installation
completion, secure power
cord for flatscreen device
by running it through
the plastic loops found
on bottom of extending
arms; then attach plug
to power source. Wall
mount can be positioned
in 3 easily extendable
configurations.
• To adjust tilt angle of
wall mount, turn tension
knobs found behind
both sides of flatscreen
mounting plate
counterclockwise; achieve
required tilt position
by gently pushing on
upper crossbar while
maintaining a firm grip
on lower one; tighten
securely by turning
tension knobs clockwise.
• It is recommended that
2 adults be used to
swivel wall mount side-
to-side and/or adjust
panning angle. Begin
with Adult A grasping
right end of crossbars
and Adult B grasping
left end. Depending
on which direction is
required, 1 adult should
push crossbars while the
other pulls it into desired
position.
Installation Instructions