User Manual

9Installation Instructions
STEP 3:
Installing Mounting
Bracket Directly On Wall
• After confirming height
positioning is appropriate
by marking wall with a
pencil, hold wall mount
of mounting bracket
firmly against wall and
use pencil to mark exact
location of drill holes,
using included leveler
to ensure a proper
balance; then remove
wall mount and pre-drill
holes (see sidebar for
specific mounting details
regarding sheetrock and
concrete walls).
• To ensure wall mount is
not being installed upside
down, verify that the
tension knobs found on
both sides of flatscreen
mounting plate are
positioned toward the top
of device.
• Hold wall mount securely
and begin inserting screws
into holes found on all 4
corners of wall mount; be
sure to use appropriate
anchors or washers with
proper screws.