User Manual

11Installation Instructions
Flush Installation
Note: Before starting, make
sure the VESA mount,
mounting arm, and
monitor are facing the
proper direction.
1. Carefully place your
monitor facedown on a
flat surface.
Tip: To avoid scratching the
screen, place your monitor
on a soft cloth such as
a towel.
2. Align the mounting
holes in the VESA mount
with the corresponding
mounting holes in
your monitor.
3. Depending on your
monitor’s thread size,
insert four of the included
M4×12 or M5×12 screws
into the VESA mount
and use a Phillips-head
screwdriver to fasten
them until fully tightened.
Repeat these or the other
set of installation steps as
necessary for your second
monitor and continue to
Attaching the Mounting Arm
Assembly on page 13.
D
E
Adjust locating ring at proper height and screw up tight to hold the mount.
A~B A~B
C
X
TVTV TV
±15°
±15°
180°
180°
360°
360°
360°
360°