User Manual

12 Installation Instructions
Recessed Installation
Note: Before starting, make
sure the VESA mount,
mounting arm, and
monitor are facing the
proper direction.
1. Carefully place your
monitor facedown on a
flat surface.
Tip: To avoid scratching the
screen, place your monitor
on a soft cloth such as
a towel.
2. Place four of the included
spacers on each of your
monitor’s four VESA
mounting holes.
3. Align the mounting holes
in the VESA mount with
the four spacers.
4. Depending on your
monitor’s thread size,
insert four of the included
M4×30 or M5×30 screws
into the VESA mount
and use a Phillips-head
screwdriver to fasten
them until fully tightened.
Tip: Thread each of the
screws by hand before
fastening them with the
screwdriver.
Repeat these or the other
set of installation steps as
necessary for your second
monitor, and continue to
Attaching the Mounting Arm
Assembly on the next page.
A
S=3mm S=5mm