User Manual

13Installation Instructions
Attaching the Mounting Arm Assembly
1. Loosen the locking collar
by rotating the ratchet
handle, and then slide the
collar onto the shaft.
2. Slide the locking collar
to the height at which
you want to mount
your monitors, and then
tighten the ratchet handle
to lock the collar in place.
3. Slide the mounting arm
assembly (with monitors
attached) onto the shaft
so it rests on the locking
collar, and then fully
tighten the locking knob
until secure.
4. Insert the protective cap
into the top of the shaft.
5. Thread your monitor
cables through the
cable clips.
D
E
Adjust locating ring at proper height
and screw up tight to hold the mount.
A~B
A~B
C
X
TVTV TV
±15°
±15°
180°
180°
360°
360°
360°
360°