User Manual

The Gabor SCP-770 installs onto a suspended ceiling grid with tiles measuring
24 × 24 or 24 × 48 inches. Make sure the ceiling grid's rails measure a minimum
height of 1.5 inches (38 mm).
Important: You must have a 1.5 NPT compatible mount attached to your
projector.
1. Measure the width at the top of your projector's screen, and locate the
center. Make a mark on the tile above the center point.
2. Find your projector’s throw distance (check your projector’s manual). Use the
throw distance measurement and form a straight line from the mark you
made in step 1. This will determine the placement of your projector.
3. To locate the flush column placement, add the throw distance onto the
distance between the projector lens and the mount’s threaded column port
(not included). Make a mark on the finished side of the ceiling tile.
Getting Started
1.5”
Distance to flush column
Column
5
Screen
center point
Throw distance